-
Features • Ranges: from 1 to 1000 bar • Nominal Output Signal: 4...20mA (2 wires) 0...10Vdc / 0.1...5.1Vdc / 0.1...10.1Vdc / 0...5Vdc / 1...5Vdc / 1...6Vdc / 1...10Vdc / 0.2...10.2Vdc (3 wires) 0.5...4.5Vdc (3 wires - ratiometric) • Compact size • Wetted parts: Stainless steel • SIL 2 certified according to IEC/EN 62061:2005 -
Features • Ranges: from 0...3 to 0...1000 bar and ranges from -1...+1 to -1...+10 bar • Output signal 4...20mA 2-wires / 0.1...5.1Vdc /0.1...10.1Vdc / 0...5Vdc / 0...10Vdc / 1...5Vdc / 1...10Vdc • Protection rating: IP65/IP67 • Wetted parts AISI 430F and 17-4PH • Available with a variety of process connections, both standard and custom -
Features • Course Magnetic Autozero • Fine Magnetic Autozero • Calibration Signal 80% FS • Magnetic Autospan • Partial reset function • Total reset function -
Features • J1939 and CANOpen digital signal output • All stainless steel construction • Pressure ranges up to 1000 bar -
Features • Ranges: from 0...0.05 bar to 0...60 bar (0...1 to 0...1000 psi) • Complete range of voltage/current outputs • Protection rating: IP65/IP67 • Wetted parts: AISI316L • Operating temperature range -40...+85°C • Accuracy: ± 0.15% FS typical • Fill Fluid: silicone oil • Available absolute ranges • Available “Barometric” range (0.8-1.2 bar abs) • Available low ranges (50mbar and 100mbar) -
Features • Ranges: from: 0...1000 to 0...5000 bar • Accuracy: ± 0.1% FSO typical • Protection: IP65/IP67 • Internal calibration signal • Wetted parts: 15-5PH / 17-4PH stainless steel • Operating temperature: -30...+120°C • Measurement diaphragm with monolithic stainless steel structure • Suitable for measuring static and dynamic pressure * -
Features • Ranges: from: 0...1000 to 0...5000 bar • Output signal 4...20mA 2 wires / 0,1...5,1Vdc / 0.1...10.1Vdc / 0...5Vdc / 0...10Vdc / 1...5Vdc / 1...6Vdc / 1...10Vdc • Protection: IP65/IP67 • Wetted parts: 15-5PH / 17-4PH stainless steel • Measurement diaphragm with monolithic stainless steel structure • Digital Auto-Zero & Span function • Suitable for measuring static and dynamic pressure * -
Features • Ranges: from: 0...10 to 0...1000 bar 0...150 to 0...15000 psi) • Accuracy: ±0.2% FSO typical • Protection rating: IP65/IP67 • Wetted parts: 17-4PH • Temperature range: -40...+120°C • Flush fitting stainless steel measuring diaphragm • Internal calibration signal -
Features • Ranges: from 0...10 to 0...1000 bar • Output signal 4...20mA 2-wires / 0.1...5.1Vdc / 0.1...10.1Vdc / 0...5Vdc / 0...10Vdc / 1...5Vdc / 1...6Vdc / 1...10Vdc • Protection rating: IP65/IP67 • Wetted parts: 17-4PH Stainless Steel • Flush fitting stainless steel measuring diaphragm • Digital Autozero & Span function -
Features • Ranges: from 0...25 to 0...600 bar • Output signal 4...20mA 2-wires / 0.1...5.1Vdc / 0.1...10.1Vdc / 0...5Vdc / 0...10Vdc / 1...5Vdc / 1...6Vdc / 1...10Vdc • Protection rating: IP65/IP67 • Wetted parts: 17-4PH Stainless Steel • Miniature flush fitting stainless steel measuring diaphragm • Magnetic or External Autozero function -
Features • Ranges: from 0...10 bar to 0...1000 bar (0...150psi to 0...15000psi) • Accuracy: ± 0.15% FSO typical • Protection rating: IP65/IP67 • Wetted parts 17-4PH • Temperature range -40...+120°C -
Features • Ranges: from 0...4 bar to 0...1000 bar (0...60psi to 0...15000psi) • Accuracy: ± 0.1% FS typical • Complete range of voltage/current outputs • Stainless Steel construction • Protection rating: IP65/IP67 • Wetted parts17-4PH • Temperature range -40...+105°C -
Features • Ranges: from 4 to 1000 bar • Nominal Output Signal: 0...10Vdc (3 wires) / 4...20mA (2 wires) 0.5...4.5 v ratiometric • Compact size • Wetted parts: Stainless steel • SIL 2 certified according to IEC/EN 62061:2005 -
Features • J1939 and CANOpen digital signal output • All stainless steel construction • Pressure ranges up to 1000 bar -
Features • Ranges: from 0...3 to 0...1000 bar and ranges from -1...+1 to -1...+10 bar • Output signal 4...20mA 2-wires / 0.1...5.1Vdc /0.1...10.1Vdc / 0...5Vdc / 0...10Vdc / 1...5Vdc / 1...10Vdc • Protection rating: IP65/IP67 • Wetted parts AISI 430F and 17-4PH • Available with a variety of process connections, both standard and custom -
Features • Course Magnetic Autozero • Fine Magnetic Autozero • Calibration Signal 80% FS • Magnetic Autospan • Partial reset function • Total reset function -
Features • Universal mounting on Transducers with 4-20 mA Output; Plug DIN43650 • No additional Power Supply required • Easy to programming using Push Buttons • Compact Sandwich construction • Good Readability through LED-Display • Alarm: Open-Collector-Output -
Features The M0 Series is a melt pressure control system which comes complete with the following items: • M3x-6-M-xxxx-1-4-D-000 (melt pressure transducer) • 2500-0-0-0-W-0-1 (1/4 DIN pressure controller) • C08WLS (25 foot 6-pin cable) • SF18 (mounting bracket) -
Features The M7 Series is a melt pressure monitoring system which comes complete with the following items: • M3x-6-M-xxxx-1-4-D-000 (melt pressure transducer) • 40B-96-5-10-RR-R0-3-0-1 (1/8 DIN pressure indicator) • C08WLS (25 foot 6-pin cable) • SF18 (mounting bracket) -
Features The M8 Series is a melt pressure monitoring system which comes complete with the following items: • M3x-6-M-xxxx-1-4-D-000 (melt pressure transducer) • 40TB-10-RRR-1-0-1 (1/4 DIN pressure indicator) • C08WLS (25 foot 6-pin cable) • SF18 (mounting bracket) -
Features The M92 is a melt pressure and temperature monitoring system which comes complete with the following items: • M32-6-M-xxxx-1-4-D-000 (melt pressure transducer with type “J” thermocouple) • 40TB-10-RRR-2-0-1 (1/4 DIN pressure and temperature indicator) • C08WLS (25 foot 6-pin cable) • SF18 (mounting bracket) -
Features The W0 Series is a melt pressure control system which comes complete with the following items: • W3x-6-M-xxxx-1-4-D-000 (oil-filled melt pressure transducer) • 2500-0-0-0-W-0-1 (pressure controller) • C08WLS (25 foot 6-pin cable) • SF18 (mounting bracket) -
Features The W7 Series is a melt pressure monitoring system which comes complete with the following items: • W3x-6-M-xxxx-1-4-D-000 (oil-filled melt pressure transducer) • 40B-96-5-10-RR-R0-3-0-1 (1/8 DIN pressure indicator) • C08WLS (25 foot 6-pin cable) • SF18 (mounting bracket) -
Features The W8 Series is a melt pressure monitoring system which comes complete with the following items: • W3x-6-M-xxxx-1-4-D-000 (oil-filled melt pressure transducer) • 40TB-10-RR-R-1-0-1 (1/4 DIN pressure indicator) • C08WLS (25 foot 6-pin cable) • SF18 (mounting bracket) -
Features The W92 is a melt pressure and temperature monitoring system which comes complete with the following items: • W32-6-M-xxxx-1-4-D-000 (oil-filled melt pressure transducer with type “J” thermocouple) • 40TB-10-RRR-2-0-1 (1/4 DIN pressure and temperature indicator) • C08WLS (25 foot 6-pin cable) • SF18 (mounting bracket) -
Features • Amplifies the strain between the 2 mounting areas mechanically • With high grade variable digital amplifier • Ideal for tension mode • For dynamic applications • Used on presses, injection moulding and die-casting machines • Quick and easy mounting • Solid steel housing (IP67) -
Features • Small press-on sensor with one-hole mounting • Direct measurement of surface strain • Without amplifier (passiv) • High accuracy and linearity in tension and pressure (like bonded strain gauges) • For dynamic applications • Used on presses, injection moulding and die-casting machines • Quick and easy mounting • Protected against overload • Optional accessories: - Signal amplifier VDA - Monitor DU-1D -
Features • Direct measurement of surface strain • With high grade variable digital amplifier • Amplifies the signal on the spot, avoiding EMC problems • High accuracy and linearity in tension and pressure (like bonded strain gauges) • For dynamic applications • Used on presses, injection moulding and die-casting machines • Quick and easy mounting • Protected against overload -
Features • Measure strain in deep holes • With calibrated digital amplifier • Quick and easy mounting with torque-wrench • High linearity on tension and compression • For dynamic applications • Used in injection moulding and die-casting machines or any cylinder • Very high accuracy (like bonded strain gauges) • Protected against overload -
Features • Direct measurement of surface strain • With integrated digital amplifier • Quick and easy non-destructive assembly • High accuracy and linearity • Ideal for use on presses, injection-moulding and die-casting machines • One system for many different tie bar diameters (25…250mm) • Dynamic applications • Ideal for online monitoring of clamping force -
Features • Direct measurement of surface strain • Quick and easy non-destructive assembly • High accuracy and linearity in tension and pressure (like bonded strain gauges) • Ideal for use on presses, injection-moulding and die-casting machines • One system for many different tie bar diameters (25…400mm) • Dynamic applications • Without amplifier (passive) • Ideal for online monitoring of clamping force • Ideal for self-made load cells -
Features • Fast and easy strain measurement on cylinders (magnetic or not) • Very easy installation (need only 2 screw‘s) • 0.5% accuracy • Without calibration • All parts of the sensor are made in stainless materials. • Ideal for cyclical applications, e.g. clamping force measurements on presses -
Features • Amplifies the strain between the 2 mounting areas mechanically • Ideal for tension mode • With analog amplifier (active) • Dynamic applications • Presses and injection moulding machines • Solid steel housing (IP54) • Analog amplifiers are economical
