-
Features • Complete system for the simultaneous strain-measurement on up to four tie bars • Direct display of strain values in µe, kN or t (via our Inspectmate software) • Quick and non-destructive assembly with magnetic press-on technology • High accuracy and linearity in tension and pressure (like bonded strain gauges) • Ideal for use on presses, injection-moulding and die-casting machines • Application on tie bars with a diameter of 45mm or higher and flat surfaces • Dynamic applications • 4- channel digital monitor-box DU-4USB • USB connection for tie bar adjustment software and power supply • Very compact and easy to use system -
Features • Measure strain in any direction in seconds • Smallest press-on sensor with magnet mounting • Direct surface strain reading like bonded strain gages, high linearity on tension and compression • Quick and easy mounting on magnetic structures • Calibrated sensor (K=2.00) for dynamic applications • Ideal for checking FEM calculations and for stress analysis on flat steel structures • Without amplifier (passiv) • External amplifier recommended (e.g. MBA100; VDA, Monitor DU-1D -
Features- New application specific interfaces
- Sensor battery level and status monitoring
- Remote sensor identification
-
Main Characteristics • Absolute transducer • Strokes from 50 to 4000mm (RK-2-_ _ _ _ -N/E/S) • Digital output RS422 Start/Stop (RK-2-_ _ _ _ -S) • Direct analog output (RK-2-_ _ _ _ -N/K/E) • Operating temperature: -30...+90°C • Resistance to vibration (DIN IEC68T2/6 20g) • Power supply 18Vdc...30Vdc • Optional 12Vdc power supply (RK-2-_ _ _ _ -K) • The digital version (RK-2-_ _ _ _ -S) allows the remote connection (max. 50 m) of optional electronics for use of advanced analog (EKA) -
Main Characteristics • Absolute transducer • Strokes from 50 to 4000mm (RK-4-_ _ _ _ -N/E/R) • Direct analog output (RK-4-_ _ _ _ -N/K/E) • Reverse analog output (RK-4-_ _ _ _ -R) • Operating temperature: -30...+90°C • Resistance to vibration (DIN IEC68T2/6 20g) • Power supply 18Vdc...30Vdc • Optional 12Vdc power supply (RK-4-_ _ _ _ -K) -
Features • Absolute transducer • Stroke: 50 to 2500mm • Direct analog output (RK-5 N/K/E) • Inverse analog output (RK-5 O/I/R) • Operating temperature: -40...+105°C • Vibration-resistant (DIN IEC68T2/6 25g) • Power range 10VDC...32VDC current output • Power range 8VDC...32VDC voltage output -
Features • Range of measurement: from 500 to 5.000 Kg • Accuracy class: D (OIML R60) • All stainless steel construction • Corrosion resistant • Insensitive to lateral loads • Low profile • Class of protection: IP66 (DIN 40050) -
Features • Small press-on sensor with one-hole mounting • Direct measurement of surface strain • Without amplifier (passiv) • High accuracy and linearity in tension and pressure (like bonded strain gauges) • For dynamic applications • Used on presses, injection moulding and die-casting machines • Quick and easy mounting • Protected against overload • Optional accessories: - Signal amplifier VDA - Monitor DU-1D -
Features • Direct measurement of surface strain • With high grade variable digital amplifier • Amplifies the signal on the spot, avoiding EMC problems • High accuracy and linearity in tension and pressure (like bonded strain gauges) • For dynamic applications • Used on presses, injection moulding and die-casting machines • Quick and easy mounting • Protected against overload -
Features • Range of measurement: from 500 to 10.000 Kg • Accuracy class: D1 (OIML R60) • All stainless steel construction • Corrosion resistant • Insensitive to lateral loads • Grade of protection: IP66 ( DIN 40050) -
Features • Amplifies the strain between the 2 mounting areas mechanically • With high grade variable digital amplifier • Ideal for tension mode • For dynamic applications • Used on presses, injection moulding and die-casting machines • Quick and easy mounting • Solid steel housing (IP67) -
Features • Amplifies the strain between the 2 mounting areas mechanically • Ideal for tension mode • With analog amplifier (active) • Dynamic applications • Presses and injection moulding machines • Solid steel housing (IP54) • Analog amplifiers are economical -
Features • Range of measurement: from100 to 20.000 Kg • Accuracy class: 0,2% • All stainless steel construction • Corrosion resistant • Internally generated calibration signal • Grade of protection: IP67 (DIN 40050) -
Features • Universal mounting on Transducers with 4-20 mA Output; Plug DIN43650 • No additional Power Supply required • Easy to programming using Push Buttons • Compact Sandwich construction • Good Readability through LED-Display • Alarm: Open-Collector-Output -
Features • Range of measurement: from 10 to 100 kN • Accuracy class: 0,2% • All stainless steel construction • Corrosion resistant • Internally generated calibration signal • Grade of protection: IP65 (DIN 40050) -
Features • Ranges: from 0...3 to 0...1000 bar and ranges from -1...+1 to -1...+10 bar • Output signal 4...20mA 2-wires / 0.1...5.1Vdc /0.1...10.1Vdc / 0...5Vdc / 0...10Vdc / 1...5Vdc / 1...10Vdc • Protection rating: IP65/IP67 • Wetted parts AISI 430F and 17-4PH • Available with a variety of process connections, both standard and custom -
Features • Ranges: from 0...3 to 0...1000 bar and ranges from -1...+1 to -1...+10 bar • Output signal 4...20mA 2-wires / 0.1...5.1Vdc /0.1...10.1Vdc / 0...5Vdc / 0...10Vdc / 1...5Vdc / 1...10Vdc • Protection rating: IP65/IP67 • Wetted parts AISI 430F and 17-4PH • Available with a variety of process connections, both standard and custom -
Features • Course Magnetic Autozero • Fine Magnetic Autozero • Calibration Signal 80% FS • Magnetic Autospan • Partial reset function • Total reset function -
Features • Course Magnetic Autozero • Fine Magnetic Autozero • Calibration Signal 80% FS • Magnetic Autospan • Partial reset function • Total reset function -
Features • Ranges: from: 0...10 to 0...1000 bar 0...150 to 0...15000 psi) • Accuracy: ±0.2% FSO typical • Protection rating: IP65/IP67 • Wetted parts: 17-4PH • Temperature range: -40...+120°C • Flush fitting stainless steel measuring diaphragm • Internal calibration signal -
Features • Ranges: from 0...10 to 0...1000 bar • Output signal 4...20mA 2-wires / 0.1...5.1Vdc / 0.1...10.1Vdc / 0...5Vdc / 0...10Vdc / 1...5Vdc / 1...6Vdc / 1...10Vdc • Protection rating: IP65/IP67 • Wetted parts: 17-4PH Stainless Steel • Flush fitting stainless steel measuring diaphragm • Digital Autozero & Span function -
Features • Ranges: from 0...25 to 0...600 bar • Output signal 4...20mA 2-wires / 0.1...5.1Vdc / 0.1...10.1Vdc / 0...5Vdc / 0...10Vdc / 1...5Vdc / 1...6Vdc / 1...10Vdc • Protection rating: IP65/IP67 • Wetted parts: 17-4PH Stainless Steel • Miniature flush fitting stainless steel measuring diaphragm • Magnetic or External Autozero function -
Features • Ranges: from: 0...1000 to 0...5000 bar • Accuracy: ± 0.1% FSO typical • Protection: IP65/IP67 • Internal calibration signal • Wetted parts: 15-5PH / 17-4PH stainless steel • Operating temperature: -30...+120°C • Measurement diaphragm with monolithic stainless steel structure • Suitable for measuring static and dynamic pressure * -
Features • Ranges: from: 0...1000 to 0...5000 bar • Output signal 4...20mA 2 wires / 0,1...5,1Vdc / 0.1...10.1Vdc / 0...5Vdc / 0...10Vdc / 1...5Vdc / 1...6Vdc / 1...10Vdc • Protection: IP65/IP67 • Wetted parts: 15-5PH / 17-4PH stainless steel • Measurement diaphragm with monolithic stainless steel structure • Digital Auto-Zero & Span function • Suitable for measuring static and dynamic pressure * -
Features • Ranges: from 0...10 bar to 0...1000 bar (0...150psi to 0...15000psi) • Accuracy: ± 0.15% FSO typical • Protection rating: IP65/IP67 • Wetted parts 17-4PH • Temperature range -40...+120°C -
Features • Ranges: from 0...4 bar to 0...1000 bar (0...60psi to 0...15000psi) • Accuracy: ± 0.1% FS typical • Complete range of voltage/current outputs • Stainless Steel construction • Protection rating: IP65/IP67 • Wetted parts17-4PH • Temperature range -40...+105°C -
Features • Range of measurement: from 100 N to 2kN • Accuracy class: 0,5% • Corrosion resistant • Internally generated calibration signal • Orientation of the axis of maximum sensitivity for 35° independently from the position of the fixing holes • Grade of protection: IP65 (DIN 40050) • Integrated protection against overloads -
Features • Ranges: from 0...0.05 bar to 0...60 bar (0...1 to 0...1000 psi) • Complete range of voltage/current outputs • Protection rating: IP65/IP67 • Wetted parts: AISI316L • Operating temperature range -40...+85°C • Accuracy: ± 0.15% FS typical • Fill Fluid: silicone oil • Available absolute ranges • Available “Barometric” range (0.8-1.2 bar abs) • Available low ranges (50mbar and 100mbar) -
Features • Range of measurement: from 50 to 1000 kg • Accuracy class: 0,2% • All stainless steel construction • Corrosion resistant • Grade of protection: IP67 ( norme DIN 40050) • Compact size -
Features • Amplifier with fast digital output • For dynamic and static applications • Very high strain gauge bridge offset range • Compact solid aluminium housing (IP65) -
Features The W0 Series is a melt pressure control system which comes complete with the following items: • W3x-6-M-xxxx-1-4-D-000 (oil-filled melt pressure transducer) • 2500-0-0-0-W-0-1 (pressure controller) • C08WLS (25 foot 6-pin cable) • SF18 (mounting bracket) -
Features The W7 Series is a melt pressure monitoring system which comes complete with the following items: • W3x-6-M-xxxx-1-4-D-000 (oil-filled melt pressure transducer) • 40B-96-5-10-RR-R0-3-0-1 (1/8 DIN pressure indicator) • C08WLS (25 foot 6-pin cable) • SF18 (mounting bracket) -
Features The W8 Series is a melt pressure monitoring system which comes complete with the following items: • W3x-6-M-xxxx-1-4-D-000 (oil-filled melt pressure transducer) • 40TB-10-RR-R-1-0-1 (1/4 DIN pressure indicator) • C08WLS (25 foot 6-pin cable) • SF18 (mounting bracket)
