-
Features • Accepts a PT100 or thermocouple temperature probe. • Stainless steel housing • Battery powered • USB and NFC interface • Alarm relays / user set display messages • 5000 point data logger -
Features • Up to 100 bar pressure/ temperature display with scaling/ linearisation • Battery powered • Alarm relay, max/ min information • User set display messaging • 5000 point data logger with usb and nfc interface -
Features • Receives from up to 16 WTX700 Transmitters • 300m Line Of Sight Range • ISM Band 868.4MHz For European Use • Programmable Current Or Voltage & 2 relay outputs • RS485 Modbus Communication • LCD Display • Low Transmitter Battery Alarm • Push Button or PC Programmable -
Features • Accepts Signals From RTD, Thermocouple, Slidewire and mV Sensors • 300m Line Of Sight Range • 868.4MHz ISM Band for European Use • Battery Powered • Surface or Sensor Mounting Options -
Features- Magnetic drive pump
- Filter chamber with welded bottom (no seal)
- Machined from Simona® AlphaPlusTM high performance PP
- Including complete +GF+ union ends
- EPDM elastomers for PP and FPM for PVDF
- Max. temperature PP 80°C, PVDF 100°C
- Stainless steel fasteners and type shields
- Air release and drain valve
- Thermal overload incl. on/off switch and lead
- High quality European, purpose designed electric motor: - 3 phase, 50/60 Hz, 2900/3500 rpm, IP55, multi voltage - with double layer 2C chemical resistant coating - suitable for frequency drive control
-
Features- Silicon chips on differential pressure module of MEMS integration technology
- Offset function / UI software
- Low-pressure monitoring, high pressure resistance
- RS-485 communication interface (Optional), Modbus RTU protocol
- Physical unit switch (User Interface)：mbar / Pa / hPa / kPa / mmH2O / mmWS / inH2O / mmHg
- Square root function
-
Features- Silicon chips on differential pressure module of MEMS integration technology
- Offset function / UI software
- Low-pressure monitoring, high pressure resistance
- RS-485 communication interface(Optional), Modbus RTU protocol
- Physical unit switch(User Interface)：mbar / Pa / hPa / kPa / mmH2O / mmWS / inH2O / mmHg
- Square root function
-
Features- IP65 , rugged aluminum case, fit in variety harsh environment
- Capable of temperature compensation. Linear adjustment temperature & humidity by computer, analog output or option RS-485
- Measure high accuracy Temp. & humidity, reaction quickly, the sensor can work well after temporary condensation, long term stable in high humidity environment
- Process Temp. : up to 200°C, S.S. probe proof pressure : 10 bar, metal connector : installation repeatedly
- Switch multifunction physical quantities：[%RH]、[°C]、[mbar]、[g/kg]、[g/m3]、[kj/kg]
- Calibration physical quantities, measuring range, analog output, station, etc
- Free calibration software : data logger / record 65535 datas / charts
-
Features- IP rating：IP67, rugged aluminum case, fit in variety harsh environment
- Capable of temperature compensation
- Linear calibration air velocity by computer, analog output or RS-485(Optional)
- High-speed, high-accuracy measurement, quickly respond
- Thermal mass flow sensor
- LCD, display air velocity and temperature
- Switch multifunction physical quantities：[m/s]、[ft/s]、[km/h]、[mph]、[kont]
- DIP SWITCH and RS-485 function
- Follow customer needs to plan measuring range, analog output, stations, and zero-point OFF SET or
- RS-485 adjustment zero-point OFF SET
- Free programmable software : Data logger / Maximum record 65535 data / Chart
-
Features- Industrial sensor comes with high accuracy and long-term stability
- Capable of temperature compensation and linear adjustment
- Multifunction physical quantities ─ temperature & humidity/dew point/ frost point/wet-bulb temp./vapor pressure/mixture ratio/absolute humidity/ specific enthalpy
- Standard 2 analogue output or Modbus RS-485
- Option analogue output+ RS-485
- Probe : PC or S.S.；Remote type : PVC or TEFLON cable
- Power supply : 8-35VDC and 12-35VAC
- RS-485 and Modbus RTU
- Free programmable software - physical quantities/output/data logger/charts/calibration
- Option : USB to RS-485 Converter
-
Features- 0 ... 2 m/s, low wind speed measurement
- 4 ... 20 mA / 0 ... 10 V output
- Accuracy : ±2% F.S.
- Compact size and light weight, can be installed fast and easily
- Polycarbonate housing, great electrical insulation and flame-retardant properties
- RS-485 programmable software : Data logger / Charts
-
Features- Capacitive humidity sensor & Pt100
- 4 ... 20 mA / 0 ... 10 V / RS-485 Output
- Accuracy：±0.2°C (Temperature)，±2%RH (Humidity)
- Small size and light weight, can be mounted fast and easily
- Polycarbonate housing, great electrical insulation and flame-retardant properties
- RS-485 programmable software : Data logger / Charts
-
Features- Compact size from 10A to 120A
- Load voltage 480V, 600Vac
- IO-Link and Modbus RTU digital communication
-
Features- New application specific interfaces
- Sensor battery level and status monitoring
- Remote sensor identification
-
Features- Energy efficient, self-regulating SRL uses less energy when less heat is required.
- Easy to install, SRL can be cut to any length (up to max. circuit length) in the field.
- Field splices can be performed easily in minutes with no scrap or wasted cold sections.
- SRL features lower installed cost than steam tracing, less maintance expense and less downtime
- SRL can be overlapped without burnout, which simplifies heat tracing of in-line process equipment such as valves, elbows and pumps.
- Because SRL is self-regulating over-temperature conditions are minimized
-
Features • Command input from analogue voltage or current signal or potentiometer. • Switching at voltage zero crossing. • Partialization of wave train power with dynamically optimized time cycle. • Antiparallel double SCR • 2 led for supply indication, “ON” state, 1 optional LED for load interrupt alarm • 4000V isolation between input circuit and power output • MOV (varistor) • Optional monitoring of interrupted load -
Features • Command input from analogue voltage or current signal or potentiometer. • Switching at voltage zero crossing. • Partialization of wave train power with dynamically optimized time cycle. • Antiparallel double SCR • 2 led for supply indication, “ON” state, 1 optional LED for load interrupt alarm • 4000V isolation between input circuit and power output • MOV (varistor) • Optional monitoring of interrupted load -
Features- Current range from 15A up to 120A
- Ultra slim dimension
- IO-Link communication
-
Features- Operator interface with large LCD Display,customizable, with choice of colors
- Scrolling diagnostics messages, configurable, in the selected language
- Easy, guided configuration, copy/paste parameters even with power off
- Preventive maintenance with energy counters (kWh) and load switching
- 16 function block applications
- Timer, setpoint and algorithm programmer for controlling motorized valves
- Advanced tuning of control parameters
- Different password levels
- Universal input configurable for thermocouples, resistance thermometers, linear inputs
- Remote setpoint input
- Relay, logic, isolated analog outputs
- CT inputs for interrupted load diagnostics
- RS485 serial communication in Modbus RTU
- Removable faceplate for immediate replacement
- Sampling time 60ms
- 10V power supply for potentiometer and 24V for transmitter
-
Features- Single/Three phase motor control up to 500Vac - 7A - 3 kW
- Reverse rotation function
- Emergency stop compliant to PL e / SIL 3
-
Features- Compact size from 10A to 120A
- Load voltage 480V, 600Vac
- IO-Link and Modbus RTU digital communication
-
Features- Compact size from 10A to 120A
- Load voltage 480V, 600Vac
- IO-Link and Modbus RTU digital communication
-
Features- Zero-crossing voltage switching (ZC)
- Overtemperature protection
- Compact designs
-
Features- Zero-crossing voltage switching (ZC)
- Overtemperature protection
- Compact designs
-
Features- Suitable for Thermistor, Pt1000 or Pt500 temperature sensors
- Other sensors available from library
- 3 wire (0 to 10) volt output
- DIN Rail mount
- PC Programmable
- High stability
-
Features- Suitable for Pt100 temperature sensors
- 3 wire (0 to 10) volt output
- DIN Rail mount
- PC Programmable
- High Stability
-
Features- Accepts thermistors and Pt1000 sensors
- Other sensors available from library
- (4 to 20) mA two wire output
- User output trim
- PC Configuration
- Live data can be viewed on Android phone or tablet
-
D30 Series Family- D33-90/14-PP 40 - 70 m3/h
- D33-100/14-PP 40 - 90 m3/h
- D33-110/16-PP 40 - 98 m3/h
- D35-130/14-PP 40 - 132 m3/h
- D35-150/15-PP 40 - 143 m3/h
- D39-180/17-PP 40 - 180 m3/h
-
D43 Series Family- 43-400-PP 40 - 180 m3/h
- D43-600-PP 40 - 180 m3/h
-
MXH Series Family- MXH150-PP 6000 - 15000 l/h
- MXH150-PVDF 6000 - 15000 l/h
- MXH220-PP 6000 - 22000 l/h
- MXH220-PVDF 6000 - 22000 l/h
- MXH300-PP 6000 - 30000 l/h
- MXH300-PVDF 6000 - 30000 l/h
- MXH380-PP 6000 - 38000 l/h
- MXH380-PVDF 6000 - 38000 l/h
- MXH450-PVDF 6000 - 45000 l/h
-
SHX Series Family- SHX60-SS 2000 - 6200 l/h
- SHX140-SS 2000 - 14000 l/h
- SHX250-SS 2000 - 25000 l/h
- SHX300-SS 2 - 30 m3/h
- SHX500-SS 2 - 50 m3/h
-
Features- Very easy, leak free, in-tank installation
- Filter chamber with welded bottom (no seal)
- Discs (thin/thick paper, cloth), cartridges or bags
- Including complete +GF+ union
- EPDM elastomers for PP and FPM for PVDF
- Including suction strainer
- Max. temperature PP 80°C, PVDF 100°C
- Stainless steel fittings, fasteners and type shields
- Pressure gauge and air release
- High quality European, purpose designed electric motor: - 3 phase, 50/60 Hz, 2900/3500 rpm, IP55, multi voltage - with double layer 2C chemical resistant coating - full length SS shaft with PP/PVDF protection pipe - including PP drip cover, fan cover and wiring box - suitable for frequency drive control
-
Features- Full PP construction from machined Simona® AlphaPlusTM PP
- Hinged cover from reinforced PP-GF pressed plate
- Stainless steel ANSI316 forged swing bolt closure
- High wall thickness cylinder with welded bottom (no seal)
- Smart pump pull back system for easy maintenance
- Stainless steel fittings, fasteners and type shields
- Including complete +GF+ three-piece union
- EPDM elastomers
- Max. temperature 80°C
- Pressure gauge, air release and drain valve
- Thermal overload incl. on/off switch and lead
- Magnetic drive or mechanical seal pump
- High quality European, purpose designed electric motor: - 3 phase, 50/60 Hz, 2900/3500 rpm, IP55, multi voltage - with double layer 2C chemical resistant coating - suitable for frequency drive control
