-
Features • Range of measurement: from 500 to 5.000 Kg • Accuracy class: D (OIML R60) • All stainless steel construction • Corrosion resistant • Insensitive to lateral loads • Low profile • Class of protection: IP66 (DIN 40050) -
Features • Single mechanical seal • Ceramic seal • Including complete +GF+ union ends • EPDM elastomers • Max. temperature 80°C • Stainless steel fasteners and type shields • Single stage operation • High quality European, purpose designed electric motor: - 3 phase, 50/60 Hz, 2900/3500 rpm, IP55, multi voltage - with double layer 2C chemical resistant coating - suitable for frequency drive control -
Features- Designed to use up to double amounts (30A), compared to ordinary thermostats, so you can use this product without using separate relay or magnet switch when using high ampere electric heater
- Temperature Range: 50°C ~ 320°C
-
Feature
- Designed to use up to double amounts (30A), compared to ordinary thermostats, so you can use this product without using a separate relay or magnet switch when using high ampere electric heater
- Temperature Range: 0°C ~ 120°C
-
Features • Absolute transducer • Stroke: 50 to 2500mm • Direct analog output (RK-5 N/K/E) • Inverse analog output (RK-5 O/I/R) • Operating temperature: -40...+105°C • Vibration-resistant (DIN IEC68T2/6 25g) • Power range 10VDC...32VDC current output • Power range 8VDC...32VDC voltage output -
Main Characteristics • Absolute transducer • Strokes from 50 to 4000mm (RK-4-_ _ _ _ -N/E/R) • Direct analog output (RK-4-_ _ _ _ -N/K/E) • Reverse analog output (RK-4-_ _ _ _ -R) • Operating temperature: -30...+90°C • Resistance to vibration (DIN IEC68T2/6 20g) • Power supply 18Vdc...30Vdc • Optional 12Vdc power supply (RK-4-_ _ _ _ -K) -
Main Characteristics • Absolute transducer • Strokes from 50 to 4000mm (RK-2-_ _ _ _ -N/E/S) • Digital output RS422 Start/Stop (RK-2-_ _ _ _ -S) • Direct analog output (RK-2-_ _ _ _ -N/K/E) • Operating temperature: -30...+90°C • Resistance to vibration (DIN IEC68T2/6 20g) • Power supply 18Vdc...30Vdc • Optional 12Vdc power supply (RK-2-_ _ _ _ -K) • The digital version (RK-2-_ _ _ _ -S) allows the remote connection (max. 50 m) of optional electronics for use of advanced analog (EKA) -
Features • Superior chemical resistance • Rugged construction • Outstanding performance • Corrosion resistant head -
Features- New application specific interfaces
- Sensor battery level and status monitoring
- Remote sensor identification
-
Features • Measure strain in any direction in seconds • Smallest press-on sensor with magnet mounting • Direct surface strain reading like bonded strain gages, high linearity on tension and compression • Quick and easy mounting on magnetic structures • Calibrated sensor (K=2.00) for dynamic applications • Ideal for checking FEM calculations and for stress analysis on flat steel structures • Without amplifier (passiv) • External amplifier recommended (e.g. MBA100; VDA, Monitor DU-1D -
Features • Complete system for the simultaneous strain-measurement on up to four tie bars • Direct display of strain values in µe, kN or t (via our Inspectmate software) • Quick and non-destructive assembly with magnetic press-on technology • High accuracy and linearity in tension and pressure (like bonded strain gauges) • Ideal for use on presses, injection-moulding and die-casting machines • Application on tie bars with a diameter of 45mm or higher and flat surfaces • Dynamic applications • 4- channel digital monitor-box DU-4USB • USB connection for tie bar adjustment software and power supply • Very compact and easy to use system -
Features • Complete system for the simultaneous strain-measurement on up to four tie bars • Direct display of strain values in µe, kN or t • Quick and non-destructive assembly with magnetic press-on technology • High accuracy and linearity in tension and pressure (like bonded strain gauges) • Ideal for use on presses, injection-moulding and die-casting machines • Application on tie bars with a diameter of 45mm or higher and flat surfaces • Dynamic applications • 4- channel digital monitor DU4D • USB connection for tie bar adjustment software (optional) • Very compact and easy to use system -
Features • Complete system for the strain-measurement on one tie bar • Direct display of strain values in µe, kN or t • Quick and non-destructive assembly with magnetic press-on technology • High accuracy and linearity in tension and pressure (like bonded strain gauges) • Ideal for use on presses, injection-moulding and die-casting machines • Application on tie bars with a diameter of 45mm or higher and flat surfaces • Dynamic applications • 1- channel digital monitor DU1D • Battery operation possible (optional) / not rechargeable • Very compact and easy to use system -
Features • Direct measurement of surface strain • Quick and non-destructive assembly with magnetic press-on technology • High accuracy and linearity in tension and pressure (like bonded strain gauges) • Ideal for use on presses, injection-moulding and die-casting machines • Application on tie bars with a diameter of 45mm or higher and flat surfaces • Dynamic applications • Without amplifier (passive) -
Features • This transducer is designed to guarantee a high protection level (IP67) in applications under harsh conditions and outdoors, where it may be necessary to work in the direct presence of dust, dirt, or liquids (not in prolonged immersion) • Its high protection level and very small size make the PZ67-S unique in terms of reliability and flexible installation • It is ideal for glass cutting and washing machines or for honers and sanders if there is direct exposure to liquids or even just steam • Indicated for test and bench equipment, especially if outdoors -
Features • This transducer is designed to guarantee a high protection level (IP67) in applications under harsh conditions and outdoors, where it may be necessary to work in the direct presence of dust, dirt, or liquids (not in prolonged immersion) • Its high protection level and very small size make the PZ67-A unique in terms of reliability and flexible installation • It is ideal for glass cutting and washing machines or for honers and sanders if there is direct exposure to liquids or even just steam • Indicated for test and bench equipment, especially if outdoors -
Principal Characteristics • The 3/4” cylindrical housing, plus the option of all fastening systems (brackets, joints or flange), makes the PZ34 series highly versatile for a wide range of applications. • The optimized mechanical structure makes the product suitable for developing various special executions (contact Gefran customer service for details). • Installation is simplified by the lack of electrical signal variation at output outside theoretical electrical stroke. • Ideal for wood and glass working and finishing machines and for car test benches. -
Principal Characteristics • The 1/2” cylindrical housing, plus the option of all fastening systems (brackets, joints or flange), makes the PZ12 series highly versatile for a wide range of applications. • The optimized mechanical structure makes the product suitable for developing various special executions (contact Gefran customer service for details). • Installation is simplified by the lack of electrical signal variation at output outside theoretical electrical stroke. • Ideal for wood and glass working and finishing machines and for car test benches. -
Principal Characteristics • The side connection creates a through-rod structure with double rod support, guaranteeing greater overall strength of the transducer. • The return spring automatically returns the rod to zero position, making the transducer suitable for comparator applications. • The tip with roller bearing is suitable for applications where the object to be measured may be subject to shifts transverse to the transducer axle (shaft is prevented from rotating). • Ideal for checking the flatness or thickness of panels of various materials. Can also be used for valves or mechanical parts when the rod cannot be attached to the moving object -
Principal Characteristics • The side connection creates a through-rod structure with double rod support, guaranteeing greater overall strength of the transducer. • The return spring automatically returns the rod to zero position, making the transducer suitable for comparator applications. • The tip with stainless steel ball is suitable for applications where the object to be measured is not subject to shifts transverse to the transducer axle. • Ideal for checking the flatness or thickness of panels of various materials. Can also be used for valves or mechanical parts when the rod cannot be attached to the moving object. -
Principal Characteristics • The transducer’s compactness makes it suitable for installation in small spaces and for detecting small shifts. • The side connection creates a through-rod structure with double rod support, guaranteeing greater overall strength of the transducer. • Installation is simplified by the lack of electrical signal variation at output outside theoretical electrical stroke. • Ideal for small mechanical devices, valves, and test tools and benches. -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins ensure proper connection • Central cover screw design for quick wiring • Molded barriers prevent short circuit • Captive cover screw for easy assembly -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins ensure proper connection • Easy wire connection through sandwich construction • Molded barriers prevent short circuit • Rugged one body design • Polarity indication on body • Stainless steel screws and bracket for rear mounting -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins ensure proper connection • Easy wire connection through sandwich construction • Molded barriers prevent short circuit • Rugged one body design • Polarity indication on body • Stainless steel screws and brackets for front mounting -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins • Molded barriers prevent short circuit • Polarity indication next to connection screws -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins ensure proper connection • Molded barriers prevent short circuit • Polarity indication on the body • Rugged one body design • Stainless steel screws and bracket for rear mounting -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins • Molded barriers prevent short circuit • Polarity indication next to connection screws -
Features • Models 09, 11, 20 • Servo mounting • Independent linearity up to ± 0,05% (standard ± 0,5%) • Repetibility 0,01% C.E.T. • Rotation speed ≤ 600 r.p.m. (within C.E.U.) • Life duration: >100x106 operations at 10 r.p.s. • Infinite resolution • Electrical terminals: turrets • Grade of protection IP40 • Suitable for use in explosive environments with presence of gas (groups IIA, IIB, IIC) and combustible powders. Standards for simple device: ATEX CEI EN 50020 2003 - paragraph 5.4 a -
Features • Sealed industrial version • Independent linearity up to ± 0,05% (standard ± 0,5%) • Working temperature: -55...+100°C • Repetibility 0,01% della C.E.T. • Life duration: >100x106 operations at 10 r.p.s. (within C.E.U.) • Infinite resolution • Electrical connection: 5-pole connector DIN 43322 • Grade of protection IP65 • Suitable for use in explosive environments with presence of gas (groups IIA, IIB, IIC) and combustible powders. Standards for simple device: ATEX CEI EN 50020 2003 - paragraph 5.4 a -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins ensure proper connection • Easy wire connection through sandwich construction • Molded barriers prevent short circuit • Rugged one body design • Polarity indication on body -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts. • Polarized pins ensure proper connection • Easy wire connection through sandwich construction • Molded barriers prevent short circuit • Rugged one body design • Polarity indication on body • Stainless steel bracket and screws for rear panel mounting -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins ensure proper connection • Easy wire connection through sandwich construction • Molded barriers prevent short circuit • Rugged one body design • Polarity indication on body • Stainless steel bracket and screws for rear panel mounting
