-
Features • ½-inch (13mm) PFA tubing, .030” (.76mm) thick • All welded construction (shell) • 4½-inch (114mm) diameter polypropylene or PVDF shell • Internally baffled for enhanced heat exchanger performance • “U” factor (depending on flow rate): 25-50 BTU/(hr. x ft² x °F) = 142-284 J/(s x m² x °C) • Shell-side drain connection -
Features • High-flow Capacity • Ultra-High-Purity • Low-Mass Heat Exchanger • Compact Design -
Features • Accepts Signals From RTD, Thermocouple, Slidewire and mV Sensors • 300m Line Of Sight Range • 868.4MHz ISM Band for European Use • Battery Powered • Surface or Sensor Mounting Options -
Features • Receives from up to 16 WTX700 Transmitters • 300m Line Of Sight Range • ISM Band 868.4MHz For European Use • Programmable Current Or Voltage & 2 relay outputs • RS485 Modbus Communication • LCD Display • Low Transmitter Battery Alarm • Push Button or PC Programmable -
Main Characteristics • Optimized mechanical structure • Strokes from 50 to 2500 mm • Wide range of connectors for the electrical connection • Rod, nipple, exagonal flange AISI 316 • Power supply 10....32 Vdc • Resistance to vibration (DIN IEC68T2/6 12g) • Protection IP67 • Work temperature: -30°…+90°C • Synchronous Serial Interface direct to controllers • Output data resolution available from 20 to 40μm • Data format: binary or Gray code; incremental/decremental • Electromagnetic compatibility EMC 2014/30/EU • Compliant to the directive RoHS 2011/65/EU -
Main Characteristics • Optimized mechanical structure • Strokes from 50 to 2500 mm • Wide range of connectors for the electrical connection • Rod, nipple, exagonal flange AISI 316 • Work temperature: -30°…+75°C • Resistance to vibrations (DIN IEC68T2/6 12g) • Power supply 24Vdc ± 20% • Protection IP67 • Electromagnetic compatibility EMC 2014/30/EU • Compliant to the directive RoHS 2011/65/EU -
Main Characteristics • Magnetostrictive technology • Strokes from 50 to 1500 mm • Optimized mechanical structure • Rod, nipple, exagonal flange AISI 316 • Work temperature: -20....+75°C • Resistance to vibrations (DIN IEC68T2/6 12g) • Power supply 24Vdc ± 20% • Protection IP67 • Electromagnetic compatibility EMC 2014/30/EU • Compliant to the directive RoHS 2011/65/EU -
Main Characteristics • Optimized mechanical structure • Strokes from 50 to 4000 mm • Wide range of connectors for the electrical connection • Rod, nipple, exagonal flange AISI 316 • Power supply 10....32 Vdc • Resistance to vibration (DIN IEC68T2/6 15g) • Protection IP67 • Work temperature: -30°…+90°C • Synchronous Serial Interface direct to controllers • Output data resolution available from 0.5 to 40μm • Data format: binary or Gray code; incremental/decremental • Electromagnetic compatibility EMC 2014/30/EU • Compliant to the directive RoHS 2011/65/EU -
Main Characteristics • Optimized mechanical structure • Strokes from 50 to 4000 mm • Wide range of connectors for the electrical connection • Rod, nipple, exagonal flange AISI 316 • Work temperature: -30°…+85°C • Resistance to vibrations (DIN IEC68T2/6 15g) • Power supply 24Vdc ± 20% • Protection IP67 • Electromagnetic compatibility EMC 2014/30/EU • Compliant to the directive RoHS 2011/65/EU -
Main Characteristics • Optimised mechanical structure • Strokes from 50 to 2500 mm • Fast installation by mean of steel brackets • Sliding or floating magnetic cursor • Synchronous Serial Interface direct to controllers • Output data resolution available from 20 to 40 μm • Data format: binary or Gray code; incremental/ decremental • Power supply 10...32 Vdc • Resistance to vibration (DIN IEC68T2/6 12g) • IP67 protection • Work temperature: -30...+90°C • Electromagnetic compatibility EMC 2014/30/EU • Compliant to the directive RoHS 2011/65/EU -
Main Characteristics • Optimised mechanical structure • Strokes from 50 to 4000mm • Sliding or floating magnetic cursor • Availability of several analogue outputs (voltage or current) for direct position and speed measurement or reverse measurement (only position) • Single or double cursors models availability • Power supply 24Vdc ±20% • Resistance to vibration (DIN IEC68T2/6 15g) • IP67 protection • Work temperature: -30...+85°C • Electromagnetic compatibility EMC 2014/30/EU • Compliant to the directive RoHS 2011/65/EU -
Main Characteristics • Strokes from 50 to 1500mm • Sliding or floating magnetic cursor • Direct and reverse analog output for displacement • Standard valve or M12 connector • Work temperature: -20...+75°C • IP67 protection • Power supply 24Vdc ±20% • Electromagnetic compatibility EMC 2014/30/EU • Compliant to the directive RoHS 2011/65/EU -
Main Characteristics • Optimised mechanical structure • Strokes from 50 to 4000 mm • Fast installation by mean of steel brackets • Sliding or floating magnetic cursor • Synchronous Serial Interface direct to controllers • Output data resolution available from 0.5 to 40 μm • Data format: binary or Gray code; incremental/ decremental • Power supply 10...32 Vdc • Resistance to vibration (DIN IEC68T2/6 15g) • IP67 protection • Work temperature: -30...+90°C • Electromagnetic compatibility EMC 2014/30/EU • Compliant to the directive RoHS 2011/65/EU -
Main Characteristics • Optimised mechanical structure • Strokes from 50 to 4000mm • Sliding or floating magnetic cursor • Availability of several analogue outputs (voltage or current) for direct position and speed measurement or reverse measurement (only position) • Single or double cursors models availability • Power supply 24Vdc ±20% • Resistance to vibration (DIN IEC68T2/6 15g) • IP67 protection • Work temperature: -30...+85°C • Electromagnetic compatibility EMC 2014/30/EU • Compliant to the directive RoHS 2011/65/EU -
Features • circular housing • Screw connection • 3 to 52 contacts • Nickel-plated light alloy, silver-plated brass contact, PBT insert except contacts diameter 4 mm which are gold-plated brass -
Features The W92 is a melt pressure and temperature monitoring system which comes complete with the following items: • W32-6-M-xxxx-1-4-D-000 (oil-filled melt pressure transducer with type “J” thermocouple) • 40TB-10-RRR-2-0-1 (1/4 DIN pressure and temperature indicator) • C08WLS (25 foot 6-pin cable) • SF18 (mounting bracket) -
Features The W8 Series is a melt pressure monitoring system which comes complete with the following items: • W3x-6-M-xxxx-1-4-D-000 (oil-filled melt pressure transducer) • 40TB-10-RR-R-1-0-1 (1/4 DIN pressure indicator) • C08WLS (25 foot 6-pin cable) • SF18 (mounting bracket) -
Features The W7 Series is a melt pressure monitoring system which comes complete with the following items: • W3x-6-M-xxxx-1-4-D-000 (oil-filled melt pressure transducer) • 40B-96-5-10-RR-R0-3-0-1 (1/8 DIN pressure indicator) • C08WLS (25 foot 6-pin cable) • SF18 (mounting bracket) -
Features The W0 Series is a melt pressure control system which comes complete with the following items: • W3x-6-M-xxxx-1-4-D-000 (oil-filled melt pressure transducer) • 2500-0-0-0-W-0-1 (pressure controller) • C08WLS (25 foot 6-pin cable) • SF18 (mounting bracket) -
Features • Amplifier with fast digital output • For dynamic and static applications • Very high strain gauge bridge offset range • Compact solid aluminium housing (IP65) -
Features • Superior chemical resistance • Rugged construction • Long outstanding performance • Leak-free operation -
Features • Complete (turn-key) System Long-Lasting • Titanium Element Construction • PID Temperature Control • Engineered for Safe Operation -
Features • Range of measurement: from 50 to 1000 kg • Accuracy class: 0,2% • All stainless steel construction • Corrosion resistant • Grade of protection: IP67 ( norme DIN 40050) • Compact size -
Features • Input: Multi Type RTD, Slide Wire, Resistance Inputs • ATEX AND IECEx approved version • 22 Segment user linearisation for input • Sensor offset and output alignment • Adjustable input filter • Programmable burnout -
Features • Multi Type Thermocouple, MV, Inputs • ATEX, UKEX and IECEX approved version • Sensor offset or output alignment • Adjustable input filter • Programmable burnout -
Features • Ranges: from 0...0.05 bar to 0...60 bar (0...1 to 0...1000 psi) • Complete range of voltage/current outputs • Protection rating: IP65/IP67 • Wetted parts: AISI316L • Operating temperature range -40...+85°C • Accuracy: ± 0.15% FS typical • Fill Fluid: silicone oil • Available absolute ranges • Available “Barometric” range (0.8-1.2 bar abs) • Available low ranges (50mbar and 100mbar) -
Features- This product is designed to use up to double amounts (30A), compared to ordinary thermostats, so you can use this product without using separate relay or magnet switch when using high ampere electric heater
- Temperature Range: 50°C ~ 320°C
-
Features
- This product is designed to use up to double amounts (30A), compared to ordinary thermostats, so you can use this product without using separate relay or magnet switch when using high ampere electric heater
- Temperature Range: 50°C ~ 200°C
-
Features
- This product is designed to use up to double amounts (30A), compared to ordinary thermostats, so you can use this product without using a separate relay or magnet switch when using high ampere electric heater
- Temperature Range: 0°C ~ 120°C
-
Features
- This product is designed to use up to double amounts (30A), compared to ordinary thermostats, so you can use this product without using separate relay or magnet switch when using high ampere electric heater
- Temperature Range: 0°C ~ 80°C
-
Features
- This product is designed to use up to double amounts (30A), compared to ordinary thermostats, so you can use this product without using separate relay or magnet switch when using high ampere electric heater
- Temperature Range : 0°C ~ 50°C
-
Features • For use in most aqueous alkaline solutions, plating and phosphate tanks. Check solution recommendation chart with your chemical supplier for proper sheath material selection. • Heavy wall metal sheaths available in: steel, 304 stainless steel, 316 stainless steel, titanium. • Watt densities up to 35 watts per square inch (5.4 w/cm²) ensure long service life. • Vapor-resistant, flame retardant polypropylene termimal enclosure with 3 ft (.9m) flexible PVC liquid tight conduit. • Temperature and level controls sized to match the heater. • Lower watt densities for highly viscous solutions. -
Features • For use in most aqueous alkaline solutions, plating and phosphate tanks. Check solution recommendation chart with your chemical supplier for proper sheath material selection. • Heavy wall metal sheaths available in: steel, 304 stainlesss steel, 316 stainless steel, titanium. • Watt densities up to 18 watts per square inch (2.7 w/cm²) ensure long service life. • Vapor-resistant, flame retardant polypropylene termimal enclosure with 3 ft (.9m) flexible PVC liquid tight conduit. • Temperature and level controls sized to match the heater. • Lower watt densities for highly viscous solutions. -
Features • Range of measurement: from 100 N to 2kN • Accuracy class: 0,5% • Corrosion resistant • Internally generated calibration signal • Orientation of the axis of maximum sensitivity for 35° independently from the position of the fixing holes • Grade of protection: IP65 (DIN 40050) • Integrated protection against overloads -
Features • Ranges: from 0...4 bar to 0...1000 bar (0...60psi to 0...15000psi) • Accuracy: ± 0.1% FS typical • Complete range of voltage/current outputs • Stainless Steel construction • Protection rating: IP65/IP67 • Wetted parts17-4PH • Temperature range -40...+105°C -
Features • Ranges: from 0...10 bar to 0...1000 bar (0...150psi to 0...15000psi) • Accuracy: ± 0.15% FSO typical • Protection rating: IP65/IP67 • Wetted parts 17-4PH • Temperature range -40...+120°C -
Features • Ranges: from: 0...1000 to 0...5000 bar • Output signal 4...20mA 2 wires / 0,1...5,1Vdc / 0.1...10.1Vdc / 0...5Vdc / 0...10Vdc / 1...5Vdc / 1...6Vdc / 1...10Vdc • Protection: IP65/IP67 • Wetted parts: 15-5PH / 17-4PH stainless steel • Measurement diaphragm with monolithic stainless steel structure • Digital Auto-Zero & Span function • Suitable for measuring static and dynamic pressure * -
Features • Ranges: from: 0...1000 to 0...5000 bar • Accuracy: ± 0.1% FSO typical • Protection: IP65/IP67 • Internal calibration signal • Wetted parts: 15-5PH / 17-4PH stainless steel • Operating temperature: -30...+120°C • Measurement diaphragm with monolithic stainless steel structure • Suitable for measuring static and dynamic pressure * -
Features • Ranges: from 0...25 to 0...600 bar • Output signal 4...20mA 2-wires / 0.1...5.1Vdc / 0.1...10.1Vdc / 0...5Vdc / 0...10Vdc / 1...5Vdc / 1...6Vdc / 1...10Vdc • Protection rating: IP65/IP67 • Wetted parts: 17-4PH Stainless Steel • Miniature flush fitting stainless steel measuring diaphragm • Magnetic or External Autozero function -
Features • Ranges: from 0...10 to 0...1000 bar • Output signal 4...20mA 2-wires / 0.1...5.1Vdc / 0.1...10.1Vdc / 0...5Vdc / 0...10Vdc / 1...5Vdc / 1...6Vdc / 1...10Vdc • Protection rating: IP65/IP67 • Wetted parts: 17-4PH Stainless Steel • Flush fitting stainless steel measuring diaphragm • Digital Autozero & Span function -
Features • Ranges: from: 0...10 to 0...1000 bar 0...150 to 0...15000 psi) • Accuracy: ±0.2% FSO typical • Protection rating: IP65/IP67 • Wetted parts: 17-4PH • Temperature range: -40...+120°C • Flush fitting stainless steel measuring diaphragm • Internal calibration signal -
Features • Course Magnetic Autozero • Fine Magnetic Autozero • Calibration Signal 80% FS • Magnetic Autospan • Partial reset function • Total reset function -
Features • Course Magnetic Autozero • Fine Magnetic Autozero • Calibration Signal 80% FS • Magnetic Autospan • Partial reset function • Total reset function -
Features • Ranges: from 0...3 to 0...1000 bar and ranges from -1...+1 to -1...+10 bar • Output signal 4...20mA 2-wires / 0.1...5.1Vdc /0.1...10.1Vdc / 0...5Vdc / 0...10Vdc / 1...5Vdc / 1...10Vdc • Protection rating: IP65/IP67 • Wetted parts AISI 430F and 17-4PH • Available with a variety of process connections, both standard and custom -
Features • Ranges: from 0...3 to 0...1000 bar and ranges from -1...+1 to -1...+10 bar • Output signal 4...20mA 2-wires / 0.1...5.1Vdc /0.1...10.1Vdc / 0...5Vdc / 0...10Vdc / 1...5Vdc / 1...10Vdc • Protection rating: IP65/IP67 • Wetted parts AISI 430F and 17-4PH • Available with a variety of process connections, both standard and custom -
Features • Designed for Performance and Safety • Durable Constuction -
Features • Dew point calibration, highly accuracy, 4 ... 20 mA and RS-485 output • Reduce insensitivity temperature zone, quickly response • Hysteresis compensation, resistance to moisture, extreme high and low humidity impact • EMC anti-interference, anti-condensation, low-temperature influence, long-term stability • Three thread (1/2″PT, 1/2″G, and 5/8″UNF) mode can be selected -
Features- Industrial sensor comes with high accuracy and long-term stability
- Capable of temperature compensation and linear adjustment
- Multifunction physical quantities ─ temperature & humidity/dew point/ frost point/wet-bulb temp./vapor pressure/mixture ratio/absolute humidity/ specific enthalpy
- Standard 2 analogue output or Modbus RS-485
- Option analogue output+ RS-485
- Probe : PC or S.S.；Remote type : PVC or TEFLON cable
- Power supply : 8-35VDC and 12-35VAC
- RS-485 and Modbus RTU
- Free programmable software - physical quantities/output/data logger/charts/calibration
- Option : USB to RS-485 Converter
-
Features • Industrial sensor comes with high accuracy and long-term stability • Capable of temperature compensation and linear calibration • 2 analog output or Modbus RS-485 • Optional analog output + RS-485 • Probe：PC • Power supply：DC 8 ... 35 V and AC 12 ... 30 VRS-485 and Modbus RTU • Free programmable software - Physical quantities / Output / Data logger / Charts / Calibration -
Features • Excellent long-term stable ability • Cost-effective and accurate measurement • Outstanding long-term performance • Voltage or current outputs -
Features • Excellent long-term stable ability • Cost-effective and accurate measurement • Outstanding long-term performance • Voltage or current outputs -
Features • Measuring temperature and humidity • Analog outputs and RS-485 • Quick easy installation and maintenance due to well designed • Cost-efficient and reliable • Data can be logged and transferred to PC via RS-485 function link free software -
Features • IP65 , rugged aluminum case, fit in variety harsh environment • Capable of temperature compensation. Linear adjustment temperature & humidity by computer, analog output or option RS-485 • Measure high accuracy Temp. & humidity, reaction quickly, the sensor can work well after temporary condensation, long term stable in high humidity environment • Process Temp. : up to 200°C, S.S. probe proof pressure : 10 bar, metal connector : installation repeatedly • Switch multifunction physical quantities：[%RH]、[°C]、[mbar]、[g/kg]、[g/m3]、[kj/kg] • Calibration physical quantities, measuring range, analog output, station, etc • Free calibration software : data logger / record 65535 datas / charts -
Features- IP65 , rugged aluminum case, fit in variety harsh environment
- Capable of temperature compensation. Linear adjustment temperature & humidity by computer, analog output or option RS-485
- Measure high accuracy Temp. & humidity, reaction quickly, the sensor can work well after temporary condensation, long term stable in high humidity environment
- Process Temp. : up to 200°C, S.S. probe proof pressure : 10 bar, metal connector : installation repeatedly
- Switch multifunction physical quantities：[%RH]、[°C]、[mbar]、[g/kg]、[g/m3]、[kj/kg]
- Calibration physical quantities, measuring range, analog output, station, etc
- Free calibration software : data logger / record 65535 datas / charts
-
Features • IP67, Stainless steel SUS304, Pressure resistance 16 bar • 330° rotatable, lightweight, unrestricted installation • Optional on-site real-time display • Process temperature up to 180°C, custom up to 200°C (Optional) • Output：Analog / RS-485 • Wide measurement range, Temp. : -40 ... +180°C, Humidity : 0 ... 100%RH • Measuring parameter：relative humidity, dew point temperature, frost point temperature, wet-bulb temperature, vapor pressure, mixture ratio, absolute humidity and specific enthalpy. -
Features • Integrated 3 sensors in 1 device with LCD display • Measuring temperature, humidity and carbon dioxide • 2 analog outputs and Modbus RS-485 • Optional analog output + RS-485 • Quick easy installation and maintenance due to well designed • Cost-efficient and reliable • Data can be logged and transferred to PC via RS-485 function link free software -
Features • Rectangular housing • Screw connection • 3 contacts: • Nickel-plated light alloy, silver-plated brass contact, thermocouple contacts, PBT insert -
Features • More compact and lower price than tubular heat exchangers: • Improved reliability due to all welded construction: • Low internal volume • Compact modular design • Improved efficiency • Innovative design • Chemical compatibility -
Features- Capacitive humidity sensor & Pt100
- 4 ... 20 mA / 0 ... 10 V / RS-485 Output
- Accuracy：±0.2°C (Temperature)，±2%RH (Humidity)
- Small size and light weight, can be mounted fast and easily
- Polycarbonate housing, great electrical insulation and flame-retardant properties
- RS-485 programmable software : Data logger / Charts
-
Features • Range of measurement: from 10 to 100 kN • Accuracy class: 0,2% • All stainless steel construction • Corrosion resistant • Internally generated calibration signal • Grade of protection: IP65 (DIN 40050) -
Features • Years of trouble-free performance in the most demanding chemical applications, such as semiconductor, FPD, MEMS, & biomedical industries • PTFE heater element with 38mm (.015 in.) thick fluoropolymer sheath for safety & long service life • Patented “purged” element design ensures maximum element life by removing chemical • permeation • 100% fluoropolymer wetted surfaces for virtually any non-flammable process solutions including HF & KOH • Low Watt density design promotes process temperature uniformity -
Features • Universal mounting on Transducers with 4-20 mA Output; Plug DIN43650 • No additional Power Supply required • Easy to programming using Push Buttons • Compact Sandwich construction • Good Readability through LED-Display • Alarm: Open-Collector-Output -
Features • Range of measurement: from100 to 20.000 Kg • Accuracy class: 0,2% • All stainless steel construction • Corrosion resistant • Internally generated calibration signal • Grade of protection: IP67 (DIN 40050)
