-
Features • Suitable For Pt100 Temperature Sensors • (4 To 20) Ma Output • Push Button Programmable • High Stability • Output Current Trim -
Features • Suitable for thermocouple and mv sensors • (4 to 20) ma output • Pc programmable input type and range • High stability • Output current trim -
Features • Suitable for variable resistance sensors (1 to 100) kΩ • Unique push button configuration • Push button configuration • < 50 Ms Response Time • 2 Wire (4 To 20) Ma Loop Powered -
Features • Suitable for pt100 temperature sensors • (4 to 20) ma output • PC programmable temperature range • Sensor referencing • Sensor burn out detection • Free configuration software • High stability -
Features • Suitable for thermocouple sensors • (4 to 20) ma output • PC programmable input type and range • Free configuration software • Sensor referencing • Sensor burn out detection • High stability -
Features • Accepts multiple thermistor types • (4 to 20) ma output • Custom thermistors available • Sensor correction • Sensor burn out detection • PC / push button configuration • Stability • Fast response time -
Features • Input: Multi Type RTD, Slide Wire, Resistance Inputs • ATEX AND IECEx approved version • 22 Segment user linearisation for input • Sensor offset and output alignment • Adjustable input filter • Programmable burnout -
Features • Universal Input, Dual Channel • S.I.L APPROVAL, ATEX & IEC Ex Version • Maths Functions • Sensor characteristics download via USB port allows for custom types • Flash tested to 4 KV DC • Sensor referencing • Custom linearisation • Sensor burn out detection • Output current preset -
Features • HART 5,6,7 Compatible • Dual RTD, Thermocouple, Potentiometer and mV Inputs • UKEX, ATEX, IECEx Versions for Hazardous Areas • Isolated Input to Output 4kV DC Flash Tested • Maths Functions Between Inputs • SIL 2 Hardware Safety Integrity -
Features • RTD Temperature Transmitter • PT100, Cu100, Cu53, Ni100, Ni120 • (4 to 20) mA Two Wire Output • Calibration and Output Trim Without a PC • View live data on an Android phone or tablet -
Features • Dual RTD, Thermocouple, Potentiometer and mV Inputs • Maths Functions Between Inputs • Isolated Input to Output 4kV DC Flash Tested • SIL Hardware Safety Integrity -
Features • HART 5,6,7 Compatible • Dual RTD, Thermocouple, Potentiometer and mV Inputs • Maths Functions Between Inputs • Isolated Input to Output 4kV DC Flash Tested • SIL Hardware Safety Integrity -
Features • Instrinsically Safe for hazardous area use • PT100, Cu100, Cu53, Ni100, Ni120 sensor options • Single or dual channel • 22 Segment user linearization for input • Sensor offset and output alignment • PC configurable -
Features • Instrinsically Safe for hazardous area use • Loop powered • K, J, N, E, T, R, S, L, U, B, C(W5), D(W3), G(W) type Thermocouples • Single or dual channel • Sensor offset and output alignment • PC configurable -
Features • Accepts RTD, Thermocouple or Slidewire Sensors • Current (Active or Passive), Voltage Or Bipolar Voltage Output • Powered ( 10 to 32) V AC / (10 to 48) V DC Supply • 22 Segment User Linearisation • Sensor Offset and Output Alignment • View live data on an Android phone or tablet -
Features • Accepts Internal and External Powered Current Loops On Input and Output • +/- 50V DC or 50 mA input • Current, Voltage Or Bipolar Voltage Output • Powered ( 10 to 32) V AC / (10 to 48) V DC Supply • 22 Segment User Linearisation • View live data on an Android phone or tablet -
Features • Pt100,Thermocouple,mV,mA Input • (0 to 10), (0 to 5), (2 to 10), (1 to 5) and ( 0 to 1)V DC Programmable output • Push Button User Trim For In Process Fine Tuning • Galvanic Isolation • View live data on an Android phone or tablet -
Features • Pt100, Thermocouple, mA, mV input • Dual Relay Outputs 250V AC @ 1A • Relay Contacts isolated from each other • Galvanic Isolation • View live data on an Android phone or tablet -
Features • Dual Change Over Relay Output • Relay Rating 250V AC 1A; 30V DC 1A • Latching Relays In Case Of Loop Failure • Powered From 4/20mA Loop • LED Alarm Indication • View live data on an Android phone or tablet -
Features • Load Cell/Strain Gauge Bridge Inputs • (-7.5 To 7.50) Mv/ V Range, 5 V Excitation • 2 To 6 Point Calibration • Ratio Metric Measurement • Remote Tare, USB Programmable -
Features • Dual or single universal frequency inputs sensor excitation • Frequency (0.1 to 65000) Hz counter (DC TO 1000) hZ) • Rate, totalise, k factor, m factor, maths • Relay output • mA, voltage, bipolar voltage output • View live data on an Android phone or tablet -
Features • RTD, Thermocouple, mV, V, mA and Potentiometer Input • Isolated Universal Voltage or Current Output • Dual C/O Relay Trip Outputs • Universal Power Requirement 22 to 250V AC or DC • Powers both input and output current loops • SIL Approval • View live data on an Android phone or tablet -
Features • Dual Channel With 5 Port Isolation (3.75Kv) • Accepts RTD, Thermocouple or Potentiometer Sensors • Universal Voltage Or Current Outputs • Maths Functions Between Channels • Sensor Redundancy Switching • Eight User Configured Preset Configurations -
Features • Dual Channel Voltage Or Current (Active/Passive)Inputs and Outputs • 5 Port Isolation To 3.75Kv • Can Be Configured As An Active Signal Splitter • User Selectable Maths Functions On Each Output Channel • Signal Linearisation • Signal Simulate Function For Diagnostics -
Features • Output powered from the input loop • Ground loop isolation • Galvanic Isolation • High Accuracy & High Reliability -
Features • Accepts any DC Voltage Input Between -10 and 100VDC • Loop Powered 4 to 20 mA Output • Can be used as adder or subtractor • High Accuracy • Galvanic Isolation -
Features • Provides Extra Drive Capability From An Existing Current Loop • Only Requires 2.7 V From the Existing Loop • Galvanic Isolation • High Accuracy -
Features • Provides Extra Drive Capability From An Existing Current Loop • Dual channel • Only Requires 2.7 V From the Existing Loop • Galvanic Isolation • High Accuracy -
Features • Provides 2 isolated (4 to 20) mA outputs from 1 (4 to 20) mA input • High Accuracy • Galvanic Isolation • 12.5 mm Wide -
Features • (4 to 20) ma loop powered • Can be used as a loop powered process switch • Use on top of temperature probe or surface mounted • USB and NFC interface • Battery backup • 5000 point data logger • Abs plastic, stainless or aluminum housing -
Features • Push button programmable • Compact 48 x 24mm • Loop powered • 4 digit LED display • IP65 front panel seal -
Features- Thermocouple or Pt100 input
- Flexible output configuration using option “Pods”
- Current and relay output options
- Input filter
- Galvanically isolated input
-
Features- Process signal mA or voltage input
- Transmitter power supply
- Max / Min display
- Flexible output configuration using option “Pods” for mA and relay output.
- Galvanically isolated input
-
Features- Flow totaliser / batch functions
- mA or voltage input
- 6 digit display
- Programmable relay & mA outputs
- Loop power supply
- RS485 comms option
-
Features- Accepts RTD, thermocouple, mV, volts, mA
- 6 digit display
- Active or passive mA input
- Optional programmable relay & mA outputs
- High stability
- RS485 comms option
