-
Features • Range of measurement: from 20 to 200 Kg • Accuracy class: C (OIML R60) • All stainless steel construction • Corrosion resistant • Grade of protection: IP68 ( EN 60529) -
Features • Range of measurement: from 750 to 1.500 kN • Accuracy class: 1% • Internally generated calibration signal • All stainless steel construction • Corrosion resistant • Grade of protection: IP65 ( norme DIN 40050) -
Features • Innovative Design for Ultra-High-Purity (UHP) • Modular & Configurable • Low Internal Volume • Safety & Reliability -
Features • Linearity error <0,05%FSO • Voltage or current output • Low thermal drift <0,01%FSO/°C • Compact size -
Features • Range of measurement: from 100 to 50.000 Kg • Accuracy class: 0,2% • All stainless steel construction • Corrosion resistant • Internally generated calibration signal • Grade of protection: IP67 (DIN 40050) -
Features- MultiCon = Meter + Controller + Recorder + HMI + SCADA in one package
- stable firmware based on Linux
- 41 available input/output modules
- 90 logical channels
- colour LCD display 5.7" TFT, with touchscreen
- recording data with maximum speed 10Hz (ten samples per second)
- 2 or 4 GB internal data memory
- RS-485 (Modbus RTU), USB Host, Ethernet communication
- panel, compact device in 144 x 144 mm case
-
Features- MultiCon = Meter + Controller + Recorder + HMI + SCADA in one package
- stable firmware based on Linux
- 27 available input/output modules
- 60 logical channels
- colour LCD display 3.5" TFT, with touchscreen
- recording data with maximum speed 10Hz (ten samples per second)
- 2 or 4 GB internal data memory
- RS-485 (Modbus RTU), USB Host, Ethernet communication
- panel, compact device in 96 x 96 mm case
-
Features- MultiCon = Meter + Controller + Recorder + HMI + SCADA in one package
- Stable firmware based on Linux
- 13 available input/output blocks
- Colour LCD display 3,5" TFT, with touchscreen
- Recording data with maximum speed 10Hz (ten samples per second)
- 2 or 4 GB internal data memory
- RS-485 (Modbus RTU), USB Host, Ethernet communication
- Wall mounted IP 65 case
-
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts. • Brass screws with silver plating • Rugged one body design. -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts. • Copper pins with silverplating • Rugged one body design. -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts. • Copper pins with silver plating • Rugged one body design. -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts. • Copper pins with silverplating • Rugged one body design -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts. • Copper pins with silverplating • Rugged one body design. -
Features • Body of thermoset material with original thermocouple material pins and springloaded inserts. • Brass screws with silver plating • Rugged one body design. -
Features • Body of thermoset material with original thermocouple material pins and springloaded inserts. • Copper pins with silverplating • Rugged one body design. -
Features • Body of thermoset material with original thermocouple material pins and springloaded inserts. • Copper pins with silverplating • Rugged one body design. -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts. • Brass screws with silver plating • Rugged one body design. -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts. • Copper pins with silver plating • Rugged one body design. -
Features • Glass filled thermoplastic body with original thermocouple material pins • Brass screws with silver plating • Rugged one body design. -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts. • Copper pins with silver plating • Rugged one body design. -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts. • Copper pins with silver plating • Rugged one body design. • Stainless steel locking clip • Locking Connector Jack Miniature also accepts Miniature • Connector Plugs without locking feature -
Features • Glass filled high quality thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins ensure proper connection • Easy wire connection through sandwich construction • Molded barriers prevent short circuit • Rugged one body design • Stainless Steel screws with Phillips head • Stainless steel locking clip • Locking Connector Miniature also fits on our part numbers CMP and CMJ -
Features • Glass filled high quality thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins ensure proper connection • Easy wire connection through sandwich construction • Molded barriers prevent short circuit • Rugged one body design • Stainless Steel screws with Phillips head -
Features • Ceramic body with original thermocouple material pins and springloaded inserts. • Polarized pins ensure proper connection. • Oversize screw head for easy wiring. • One body design • High purity alumina body material -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins ensure proper connection • Easy wire connection through sandwich construction • Molded barriers prevent short circuit • Rugged one body design -
Features • Body of thermoset material with original thermocouple material pins and springloaded inserts. • Polarized pins ensure proper connection. • Easy wire connection through sandwich construction. • Molded barriers prevent short circuit. • Rugged one body design. -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins ensure proper connection • Easy wire connection through sandwich construction • Molded barriers prevent short circuit • Rugged one body design -
Features • Body of ultra high temp thermoset compound with original thermocouple material pins and springloaded inserts. • Polarized pins ensure proper connection. • Easy wire connection through sandwich construction. • Molded barriers prevent short circuit. • Rugged one body design. • Stainless steel bracket and screws for usage in robust environment -
Features • Glass filled high quality thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins • Central cover screw design for quick wiring • Molded barriers prevent short circuit • Captive cover screw for easy assembly • Easy wire connection through sandwich construction • Stainless Steel screws with Phillips head -
Features • Ceramic body with original thermocouple material pins and springloaded inserts. • Polarized pins ensure proper connection. • Oversize terminal screw head for easy wiring • One body design. • High purity alumina body material. -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins • Central cover screw design for quick wiring • Molded barriers prevent short circuit • Captive cover screw for easy assembly • Connects with standard horizontal and vertical panels -
Features • Body of thermoset material with original thermocouple material pins and springloaded inserts. • Polarized pins ensure proper connection. • Easy wire connection through sandwich construction. • Molded barriers prevent short circuit. • Rugged one body design -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins • Central cover screw design for quick wiring • Molded barriers prevent short circuit • Captive cover screw for easy assembly • Connects with standard horizontal and vertical panels -
Features • Body of ultra-high temp thermoset compound with original thermocouple material pins and springloaded inserts. • Polarized pins ensure proper connection. • Easy wire connection through sandwich construction. • Molded barriers prevent short circuit. • Rugged one body design. • Stainless steel bracket and screws for usage in robust environment -
Features • Range of measurement: from 100 to 3000 kN • Accuracy class: 0,5% • Elastic element in stainless steel • Corrosion resistant • Internally generated calibration signal • Grade of protection: IP65 (DIN 40050) -
Features • Range of measurement: from 50 to 1.000 kg • Accuracy class: 0,2% • All stainless steel construction • Corrosion resistant • Grade of protection: IP67 (DIN 40050) • Compact size -
Features • Very easy, leak free, in-tank installation • Compact, requires only 0 180 mm space • Easy connection above cover, no outlet pipe required • Including complete +GF+ union end • Free turning shaft, no seal or bearing, can run dry • Self priming when flooded • EPDM elastomers for PP and FPM for PVDF • Including suction strainer • Max. temperature PP 80°C, PVDF 100°C -
Features • Immersion length 300mm • Environmentally safe in-tank installation • Free turning shaft – no seal • Self-priming – can run dry • Full length motor shaft • Suction strainer • Outlet sockets available in PP and CPVC -
Features • Cantilever design, no seal or bearing, can run dry • Extended free turning 316L motor shaft • Self priming when flooded • Open impeller allowing solids up to 6 mm • Temperature up to 130°C • EPDM elastomers • Shaft labyrinth to prevent vapours attacking motor • DIN11851 union connection, for easy loosen and tighten -
Features • Very easy, leak free, in-tank installation • Including complete +GF+ union end • Free turning shaft, no seal or bearing, can run dry • Self priming when flooded • EPDM elastomers for PP and FPM for PVDF • Including suction strainer • Max. temperature PP 80°C, PVDF 100°C -
Features • Machined from, Simona® AlphaPlus'" high performance PP • Very easy, leak free, in-tank installation • Easy connection above cover • Including complete +GF+ union end • Free turning shaft, no seal or bearing, can run dry • Impeller locked (no damage with wrong rotation direction) • Self priming when flooded • EPDM elastomers • Max. temperature 80°C • High quality European, purpose designed electric motor: - 3 phase, 50 Hz, 2900 rpm, IP55, multi voltage - with double layer 2C chemical resistant coating - full length SS shaft with PP protection pipe - suitable for frequency drive control - built-in PTC-thermistor - stainless steel fasteners - CE certified and UL listed -
Features • Machined from, Simona® AlphaPlus'" high performance PP • Very easy, leak free, in-tank installation • Easy connection above cover • Including complete +GF+ union end • Free turning shaft, no seal or bearing, can run dry • Impeller locked (no damage with wrong rotation direction) • Self priming when flooded • EPDM elastomers • Max. temperature 80°C -
Features • Low energy consumption due to high hydraulic efficiency and IE3 class Premium Efficiency Motor • Machined high grade Simona® AlphaPlus™ PP • Elastomers EPDM • Sealless pump, can run dry endlessly • Round mounting plate for easy installation • Including discharge pipe with GF union • Impeller locked (no damage with wrong rotation direction) • Oversized motor according to Hendor heavy duty specifications • Stainless steel shaft and fasteners (no metal in contact with liquid) • Motor 4 pole, IP55, Class F, S1 Duty and PTC-160 • Double layer 2C chemical resistant coating • Hoisting eyes for easy lifting and transportation • CE and usULc certified complying with IEC 60034 standards -
Features- Very easy, leak free, in-tank installation
- Compact, requires only 0 130 mm space
- Easy connection above cover, no outlet pipe required
- Including complete +GF+ union end
- Free turning shaft, no seal or bearing, can run dry
- Self priming when flooded
- EPDM elastomers for PP and FPM for PVDF
- Including suction strainer
- Max. temperature PP 80°C, PVDF 100°C
-
Features • Measurement of nozzle touch force (nozzle pressure force) in injection-molding and die-casting machines • User-friendly, small and compact • Force measurement range: 200kN / 450kN • Very high repeatability • Direct connection to our signal amplifiers and monitors • Various nozzle adapters can be retrofitted (e.g., brass) • Magnetic bases can be retrofitted in different sizes -
Features • FLAT-body design • Good linearity • Designed integrate into machine • With EEPROM for sensitivity detection (option) -
Features • FLAT-body design • Good linearity • Designed integrate into machine -
Features- Thermocouple or Pt100 input
- Flexible output configuration using option “Pods”
- Current and relay output options
- Input filter
- Galvanically isolated input
-
Features- Process signal mA or voltage input
- Transmitter power supply
- Max / Min display
- Flexible output configuration using option “Pods” for mA and relay output.
- Galvanically isolated input
-
Features- Flow totaliser / batch functions
- mA or voltage input
- 6 digit display
- Programmable relay & mA outputs
- Loop power supply
- RS485 comms option
-
Features- Accepts RTD, thermocouple, mV, volts, mA
- 6 digit display
- Active or passive mA input
- Optional programmable relay & mA outputs
- High stability
- RS485 comms option
-
Features • (4 to 20) ma loop powered • Can be used as a loop powered process switch • Use on top of temperature probe or surface mounted • USB and NFC interface • Battery backup • 5000 point data logger • Abs plastic, stainless or aluminum housing -
Features • Up to 100 bar pressure/ temperature display with scaling/ linearisation • Battery powered • Alarm relay, max/ min information • User set display messaging • 5000 point data logger with usb and nfc interface -
Features • ATEX and IECEx approval -Ex ia IIC T4 Ga -Ex ia IIIC T135°C Da • 3 wire RTD or thermocouple input • Universal temperature RTD and thermocouple input • 6 digit alpha-numeric LCD display • Approx 8mm display, non-backlit -6 digits,14 segment input value plus “Warning” icon. -Resolution to one decimal place with unit character. -Up to two decimal places (no units displayed with 2 dec place configuration). • 2 x AAA 1.5 V Lithium, Energizer L92 Battery Power (approx. 2-3 years life at 10 sec log interval) • Push-button and NFC configuration • Data logger (NFC interface) up to 1500 temperature measurements stored -
Features • Accepts a PT100 or thermocouple temperature probe. • Stainless steel housing • Battery powered • USB and NFC interface • Alarm relays / user set display messages • 5000 point data logger -
Features • Push button programmable • Compact 48 x 24mm • Loop powered • 4 digit LED display • IP65 front panel seal -
Features • Available for all Sensormate sensors (2/4 bridges) • Direct display of the measured values in µe, kN or t • High accuracy and stable reset • Automatic reset, external reset and alarm output • Ideal for control cabinet installation (96x96mm, DIN 43700) • Battery operation possible (optional) / not rechargeable -
Features • Available for all Sensormate sensors (2/4 bridges) • Direct display of the measured values in µe, kN or t • High accuracy and stable reset • Very bright displays and robust aluminum housing (IP52); Ideal for rough environments • USB connection for tie bar adjustment software (optional) • Analog output 0...10VDC (optional) -
Features • Available for all Sensormate sensors (2/4 bridges) • Direct display of the measured values in µe, kN or t (via our Inspectmate software) • High accuracy and stable reset • Robust aluminium housing (IP50) • USB connection for tie bar adjustment software and power supply -
Features- Independent adjustment of Max and BIAS.
- Down-opened Panel, easy for fuse replacement.
- VR of Max and SFS are installed in the front panel, easy for adjustment.
- Multi-LED display panel makes the operating condition clear.
- The auxiliary powers (AC1, AC2) are independently controlled for all models.
- Build-in buffering output adjustment (SFS VR), adjusting range 1~22 seconds. (Only for the phase control product)
- Top & bottom shielding covers are designed for safety and fashion out looking, also easy for wiring installation.
- In case of 0.5 Hz sudden power losses, system output can be switched off immediately. Once the power is restored, the system will buffer the output to prevent the voltage surge for fuse burn-down
-
Features • Compact and robust, service friendly • Filter chamber with welded bottom (no seal) • String wound, spunbonded, pleated or carbon cartridge (max. Ø 70mm) • All PP or PVDF construction • Max. temperature PP 80˚C / PVDF 100˚C • Unions for rigid piping (PP, PVDF or CPVC sockets) -
Features • Compact and robust, service friendly • Filter chamber with welded bottom (no seal) • Discs (thin/thick paper, cloth), cartridges (max. Ø 69mm) or pleated bag • All PP construction • Top plate made of glass-filled PP • Max. temperature PP 80˚C • External fasteners in SS316 • Unions for rigid piping (PP or CPVC sockets)
