- MXH150-PP 6000 - 15000 l/h
- MXH150-PVDF 6000 - 15000 l/h
- MXH220-PP 6000 - 22000 l/h
- MXH220-PVDF 6000 - 22000 l/h
- MXH300-PP 6000 - 30000 l/h
- MXH300-PVDF 6000 - 30000 l/h
- MXH380-PP 6000 - 38000 l/h
- MXH380-PVDF 6000 - 38000 l/h
- MXH450-PVDF 6000 - 45000 l/h
-
MXH Series Family -
Features • Reduced complexity • Designed for performance • Engineered for Safety • Advanced Cleanliness -
Principal Characteristics • The transducer’s compactness makes it suitable for installation in small spaces and for detecting small shifts. • The joint with up-take of slack and M4 threading provides greater tolerances in movement. • Installation is simplified by the lack of electrical signal variation at output outside theoretical electrical stroke. • Ideal for small mechanical devices, valves, and test tools and benches. -
Principal Characteristics • The transducer is designed to satisfy extreme applicative demands in terms of mechanical strength. • The 10 mm diameter rod, large steel joints, and reinforced structure make this series mechanically ideal for Metal working, woodworking, and ceramics. • Installation is simplified by the lack of electrical signal variation at output outside theoretical electrical stroke. • The structure based on self-aligning and weight-bearing ball joints permits assembly with free movement of the transducer axle -
Applicative Characteristics • The PC67 displacement transducer was developed to guarantee a high protection level (IP67) in applications under harsh conditions and outdoors, where it may be necessary to work in the presence of dust, dirt, or liquids (not in prolonged immersion). • The robust structure of the PC series has been improved thanks to a sealing system (patent pending) that makes it extremely reliable. • Ideal for mobile hydraulic applications, on agricultural machines, earth-moving equipment and utility vehicles -
Features • Interface module integrated in the connector • Standard output 0...10Vdc (PCIR 101) • Standard output 4...20mA(PCIR 102) • High linearity • Adjustable Zero and Span • Low zero and span thermal drift • 4 pole female DIN43650 connector for LTM and PKM potentiometer • DIN 43650 4-pin female connector for direct connection to LTM and PKM potentiometers (the DIN 43650 connector in the PCM series is smaller and cannot be connected directly) -
Features • High impedance input >100 Mohm • Voltage output 0...10V • Linearity error < 0,02% full scale output • Can be connected simultaneously to two transducers • Low thermal drift 0,01% full scale / °C • Suitable for DIN rail mounting EN50035 and EN50022 -
Features- Silicon chips on differential pressure module of MEMS integration technology
- Offset function / UI software
- Low-pressure monitoring, high pressure resistance
- RS-485 communication interface(Optional), Modbus RTU protocol
- Physical unit switch(User Interface)：mbar / Pa / hPa / kPa / mmH2O / mmWS / inH2O / mmHg
- Square root function
-
Features • The transducer has been improved in order to guarantee greater reliability under all conditions • Mechanical linkage using joint with take up of play, M5 thread • Installation is made simpler by the absence of electrical signal variation in output, outside the Theoretical Electrical Stroke • The new grooves provide an excellent alternative to the usual system of fastening with brackets • Ideal for applications on plastic injection presses, vertical presses, and on many other processing machines • Grade of protection IP40 -
Principal Characteristics • The PMA-12 transducer, a development of the PME series, is designed for installation with self-aligning joints. • The IP67 protection level makes the PMA-12 highly suitable for humid and wet environments and in temporary immersion (CEI EN 60529). • Available only with cable output. • Ideal for applications on metalworking and ceramics machines, as well as on earth-moving machines and utility vehicles. Recommended in all cases where the angle of the drive axle changes constantly. -
Features- Silicon chips on differential pressure module of MEMS integration technology
- Offset function / UI software
- Low-pressure monitoring, high pressure resistance
- RS-485 communication interface (Optional), Modbus RTU protocol
- Physical unit switch (User Interface)：mbar / Pa / hPa / kPa / mmH2O / mmWS / inH2O / mmHg
- Square root function
-
Features • Rectilinear displacement transducer without drag shaft, completely water-tight (IP67), designed to work in humid environments (CEI EN 60529) • The PME series has an external magnetic actuator linked to an internal measurement cursor • The magnetic cursor replaces the drag shaft used in traditional displacement transducers, making the instrument even more compact • Installation is made simpler because there is no variation in the electrical output signal outside the Theoretical Electrical Stroke • The instrument can be used in compressed air applications with max. working pressure of 20 bar. -
Main Characteristics • The PMI-12 transducer is designed for use inside oil pressure cylinders, applications that demand high strength. • The AISI316 stainless steel body and elevated protection level permit installation in cylinders with pressures up to 250 bar (400 bar peak). • Available with internal flanges or external threads to guarantee mechanical compatibility with all principal cylinder types. • Patented -
Applicative Characteristics • The PMI-SL transducer, an evolution of the PMI-12, is designed for all inside cylinder applications which require a smaller transducer. For this reason, the diameter has been reduced to 12.7 mm. • The PMI Slim offers the same robustness as the PMI-12: AISI 316 stainless steel body, IP67 protection level, and pressure resistance up to 250 bar (400 bar peak) • Available with flanged or threaded heads, to guarantee mechanical compatibility with all main cylinder types • Patented solution • Ideal for applications inside hydraulic cylinders, demanding simple solutions which guarantee measurement repeatability -
Applicative Characteristics • The PMI-SLE transducer, is the amplified version of the PMI-SL, a product designed for all inside cylinder applications which require a smaller transducer (the rod diameter is only 12,7 mm). • The PMI Slim offers the same robustness: stainlessteel body, IP67 protection level, and pressure resistance up to 250 bar (400 bar peak) • Available with flanged or threaded heads, to guarantee mechanical compatibility with all main cylinder types • Patented solution • Ideal for applications inside hydraulic cylinders, demanding simple solutions which guarantee measurement repeatability. -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins ensure proper connection • Easy wire connection through sandwich construction • Molded barriers prevent short circuit • Rugged one body design • Polarity indication on body -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins ensure proper connection • Easy wire connection through sandwich construction • Molded barriers prevent short circuit • Rugged one body design • Polarity indication on body • Stainless steel bracket and screws for rear panel mounting -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins ensure proper connection • Easy wire connection through sandwich construction • Molded barriers prevent short circuit • Rugged one body design • Polarity indication on body • Stainless steel bracket and screws for rear panel mounting -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins ensure proper connection • Easy wire connection through sandwich construction • Molded barriers prevent short circuit • Rugged one body design • Polarity indication on body • Stainless steel screws and brackets for front mounting -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins ensure proper connection • Easy wire connection through sandwich construction • Molded barriers prevent short circuit • Rugged one body design • Polarity indication on body • Stainless steel bracket and screws for rear panel mounting -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts. • Polarized pins ensure proper connection • Easy wire connection through sandwich construction • Molded barriers prevent short circuit • Rugged one body design • Polarity indication on body • Stainless steel bracket and screws for rear panel mounting -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins ensure proper connection • Easy wire connection through sandwich construction • Molded barriers prevent short circuit • Rugged one body design • Polarity indication on body -
Features • Sealed industrial version • Independent linearity up to ± 0,05% (standard ± 0,5%) • Working temperature: -55...+100°C • Repetibility 0,01% della C.E.T. • Life duration: >100x106 operations at 10 r.p.s. (within C.E.U.) • Infinite resolution • Electrical connection: 5-pole connector DIN 43322 • Grade of protection IP65 • Suitable for use in explosive environments with presence of gas (groups IIA, IIB, IIC) and combustible powders. Standards for simple device: ATEX CEI EN 50020 2003 - paragraph 5.4 a -
Priming chambers add a self-priming feature to a standard horizontal pump. A centrifugal pump by its principle is not self-priming, because of its limited ability to transport air. The priming chamber is initially filled with solution. The priming time depends on length/diameter of suction pipe. After the initial filling of the chamber, next time, the pump will automatically reprime. [ Click here for more details ] -
Features • Models 09, 11, 20 • Servo mounting • Independent linearity up to ± 0,05% (standard ± 0,5%) • Repetibility 0,01% C.E.T. • Rotation speed ≤ 600 r.p.m. (within C.E.U.) • Life duration: >100x106 operations at 10 r.p.s. • Infinite resolution • Electrical terminals: turrets • Grade of protection IP40 • Suitable for use in explosive environments with presence of gas (groups IIA, IIB, IIC) and combustible powders. Standards for simple device: ATEX CEI EN 50020 2003 - paragraph 5.4 a -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins • Molded barriers prevent short circuit • Polarity indication next to connection screws -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins ensure proper connection • Molded barriers prevent short circuit • Polarity indication on the body • Rugged one body design • Stainless steel screws and bracket for rear mounting -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins • Molded barriers prevent short circuit • Polarity indication next to connection screws -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins ensure proper connection • Easy wire connection through sandwich construction • Molded barriers prevent short circuit • Rugged one body design • Polarity indication on body • Stainless steel screws and brackets for front mounting -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins ensure proper connection • Easy wire connection through sandwich construction • Molded barriers prevent short circuit • Rugged one body design • Polarity indication on body • Stainless steel screws and bracket for rear mounting -
Features • Glass filled thermoplastic body with original thermocouple material pins and springloaded inserts • Polarized pins ensure proper connection • Central cover screw design for quick wiring • Molded barriers prevent short circuit • Captive cover screw for easy assembly -
Principal Characteristics • The transducer’s compactness makes it suitable for installation in small spaces and for detecting small shifts. • The side connection creates a through-rod structure with double rod support, guaranteeing greater overall strength of the transducer. • Installation is simplified by the lack of electrical signal variation at output outside theoretical electrical stroke. • Ideal for small mechanical devices, valves, and test tools and benches. -
Principal Characteristics • The side connection creates a through-rod structure with double rod support, guaranteeing greater overall strength of the transducer. • The return spring automatically returns the rod to zero position, making the transducer suitable for comparator applications. • The tip with stainless steel ball is suitable for applications where the object to be measured is not subject to shifts transverse to the transducer axle. • Ideal for checking the flatness or thickness of panels of various materials. Can also be used for valves or mechanical parts when the rod cannot be attached to the moving object.
